ASTM B704 Alloy 825 Dual Encapsulated control Line for Downhole Chemical Injection
Our products are tested by Tubular Inspection Center of China National Petroleum Corporation, and each performance index meets America ASTM A269, and related industry standards, partial quality index even exceeds the international level. Our products are well accepted by domestic oifield such as Shengli Oilfield, Daqing Oilfield and etc. Our products are mainly applied in petroleum industry, chemical industry, shipbuilding, natural gas, etc.
| OD |
Wall
(inch) |
Materials |
Standard |
Working Pressure
(MPa) |
Length |
| 1/8" |
0.02,0.028,0.035 |
Austenitic steel 304L (UNS S30403)
Austenitic steel 316L (UNS S31603)
Duplex 2205 (UNS S32205 & S31803)
Super Duplex 2507 (UNS S32750)
Incoloy 825 (UNS N08825)
Inconel 625 (UNS N06625) |
ASTM-A 269
ASTM-A 632
ASTM-A 789
ASTM-B 704 |
60-120 Mpa |
Customized |
| 3/16" |
0.02,0.028,0.035,0.049 |
| 1/4" |
0.02,0.028,0.035,0.049
0.065.0.083
|
| 5/16" |
| 3/8" |
| 1/2" |
|
OD: Up to 1 Inch
The specification and length per coil can be customized according to customer’s requirements.
|
Encapsulation materials:Santoprene,F40;F46;FEP (Fluorinated Ethylene Propylene);PVC (Polyvinyl chloride);Nylon Encapsulated etc..
| Chemical Composition,% |
| Standard |
ASTM A269 |
ASTM A789 |
ASTM B704 |
| Material |
SS 304 |
SS 304L |
SS 316 |
SS 316L |
Duplex 2205 |
Super Duplex 2507 |
Incoloy 625 |
Incoloy 825 |
| UNS |
S30400 |
S30403 |
S31600 |
S31603 |
S32205 |
S32750 |
N06625 |
N08825 |
| C |
0.080 |
0.035 |
0.080 |
0.035 |
0.030 |
0.030 |
0.10 |
0.05 |
| Mn |
2.00 |
2.00 |
2.00 |
2.00 |
2.00 |
1.20 |
0.50 |
1.00 |
| P |
0.045 |
0.045 |
0.045 |
0.045 |
0.030 |
0.035 |
0.015 |
... |
| S |
0.030 |
0.030 |
0.030 |
0.030 |
0.020 |
0.020 |
0.015 |
0.030 |
| Si |
1.00 |
1.00 |
1.00 |
1.00 |
1.00 |
0.80 |
0.50 |
0.50 |
| Ni |
8.0-11.0 |
8.0-12.0 |
10.0-14.0 |
10.0-15.0 |
4.5-6.5 |
6.0-8.0 |
min 58.0 |
38.0-46.0 |
| Cr |
18.0-20.0 |
18.0-20.0 |
16.0-18.0 |
16.0-18.0 |
22.0-23.0 |
24.0-26.0 |
20.0-23.0 |
19.5-23.5 |
| Mo |
... |
... |
2.00-3.00 |
2.00-3.00 |
3.0-3.5 |
3.0-3.5 |
8.0-10.0 |
2.5-3.5 |
| N |
... |
... |
... |
... |
0.14-0.20 |
0.24-0.32 |
... |
... |
| Cu |
... |
... |
... |
... |
... |
0.50 |
... |
1.5-3.0 |
| Fe |
|
|
|
|
|
|
5.0 |
min 22.0 |
| Al |
|
|
|
|
|
|
0.4 |
0.2 |
| Ti |
|
|
|
|
|
|
0.40 |
0.6-1.2 |
| Cb+Ta |
|
|
|
|
|
|
3.15-4.15 |
... |
We welcome to your contact!
Two joint of 3/8" x 0.035" Encapsulated Control Line flatpacked in a 24mm X 13mm jacket, The encapsulation materials can be Santoprene or others nominated by customer, two joint of control line tubing can be color coded. Tube material can be weather stailess steel or alloy steel like Incoloy 825 or Incoloy 625 . Inside of tube,can be pre-flushed, tested and supplied with any fluid,The Flatpack finally will be level wound on wooden drum and install protector to prevent from mechanical damage.
With fantastic quality and most competitive price, we can guarantee 100% pass rate and delivery rate. Our quality and service have been recognized by all our customers, we are able to serve you quite well.
Product Tags:
|
|
Alloy 825 Dual Encapsulated Control Line Tubing Images
|
